Industrial stormwater facility
2 28NNA000185 · Notice of Non-Applicability · Saint Helena, Napa
Official
Hydrologic
Official facility coordinate plotted against the official 2026 impaired-water geometry.
303(d) context
Grouped by derived geographic association class.
River & Stream · Integrated Report category 5 · TMDL required
Listed pollutants / stressors (8) Aluminum, Indicator Bacteria, Manganese, Oxygen, Dissolved, Sediment, Sedimentation/Siltation +2 more
River & Stream · Integrated Report category 4a · TMDL approved by USEPA
Listed pollutants / stressors (2) Indicator Bacteria, Sedimentation/Siltation
Associations are calculated from official facility coordinates, USGS HUC12 boundaries, and official 2026 impaired-water geometry. They do not establish a discharge connection or causation.
Water Board-stated TMDL waste load allocations applied to this industrial permit in SMARTS.
No SMARTS TMDL requirement is recorded for this WDID. In the statewide TMDL export only permits in Regions 4, 8 and 9 currently carry industrial TMDL requirements, so an absence here is not a statement that the facility discharges to an unimpaired water.
Self-reported industrial stormwater sampling results submitted to SMARTS.
No SMARTS monitoring results are recorded for this WDID in the statewide dataset.
YDOS-derived
Reported SMARTS analytical results compared against the Numeric Action Levels of the Industrial General Permit version in effect for each reporting year (July 1 – June 30).
No reporting year for this WDID contains samples eligible for NAL comparison. That can mean no analytical results were reported, the reported parameters have no adopted NAL, or the samples were taken at locations that are not permitted discharge points.
An NAL exceedance is a permit-defined condition that triggers Exceedance Response Actions under the Industrial General Permit. It is not a violation, an enforcement action, or a Water Board compliance determination. Annual values use the arithmetic average of eligible results with non-detects treated as zero; instantaneous maximum NALs (total suspended solids, oil and grease, pH) are exceeded when two or more eligible results in a reporting year fall outside the level. Rules transcribed from 2014-0057-DWQ as amended by 2015-0122-DWQ ↗ (effective 2015-07-01, superseded 2020-06-30); 2014-0057-DWQ as amended by 2018-0028-DWQ ↗ (effective 2020-07-01).
Provenance